SUPPRESSORS

The Gemtech Lunar 9 suppressor delivers the internal volume and turbulence needed for serious sound suppression with both 9mm and 300BLK subsonic cartridges. The Lunar 9's internal design ensures optimal baffle alignment for easy disassembly and cleaning. 1/2 x 28 Thread.

The Recce 5 (MOD 3) is the compact 5.56mm little brother to the Recce 7. It is one of the lightest most durable, accurate, and high performance 5.56mm suppressors on the market. The Recce 5, weighs only 14.5 ounces on it's own and a mere 16.3 ounces as a suppressor system with the included Taper Mount Minimalist Brake. The included Taper Mount ensures minimal and repeatable point of impact shift with only minor weight gain. The Recce 5 achieves out of this world sound performance vs its size. Utilizing our Patented Efficiency baffle technology this compact suppressor drops SPL by 35db on a 14.5" M4 while keeping gas blow-back to normal levels. To increase performance for military users a high efficiency low profile flash suppressor was integrated into the front of the suppressor. This feature reduces flash, providing minimal signature for the user in low light environments.

Sig's MODX-9 features a user configurable modular baffle design. It has titanium construction with an unique exterior design which doubles as a wrench flats. Included are 1/2"-28 & M13.5x1LH threads, and fixed barrel spacer for use with carbines. The MODX-9 also features 21 points of impact adjustment.

The Sig Sauer SRD22X .22LR Suppressor can be used on both pistols and rifles and features a Grade 9 Titanium outer tube with stainless steel baffles. An inner stainless steel tube enables easy disassembly and cleaning. Due to the durability of its materials, the SRD22X can be used with .22LR pistols or rifles, and pistols or rifles chambered in .17HMR/.17 Mach II and .22 Magnum. The SRD22X comes with a 1/2”x 28tpi and an available M9x.75 rear mount. Specifications are subject to change.

-Length: 5.8 in (147 mm)

-Weight: 5.1 oz (144 g)

-Threads: 1/2-28 tpi

SilencerCo Hybrid 46 DTM is the same familiar face as the Hybrid 46 with a lighter mount. Featuring a titanium tube and fully-welded, 17-4 stainless steel and Inconel baffle stack, the Hybrid 46 DTM is tough enough to tame nearly every round that’ll fit through its .46 caliber bore. From pistols up to .45 caliber, lever guns up to .45-70 Gov’t, rifles in 5.56 on up to 338 Lapua Magnum energy levels firing bullets up to .46 caliber, this do-it-all silencer has you covered!

Full-auto and magnum-rated, the Hybrid 46 DTM uses a titanium tube to keep its weight down to just 13.7 ounces. The Hybrid 46 DTM can easily swap between all of your host weapons by using ASR mounts, a pistol booster, 3-Lug adapters, direct thread adapters, and more.

As with its modular siblings, the Omega 36M and Hybrid 46M, the Hybrid 46 is manufactured in Utah and protected by SilencerCo’s lifetime warranty.

TECHNICAL SPECIFICATIONS:

• Weight: 13.7 oz
• Length: 7.8”
• Diameter: 1.56"
• Build materials: titanium; stainless steel; Inconel
• Full-auto and magnum rated!
• The Hybrid uses the same pistons as the Octane Series, Osprey Series, and Omega K Series

The Hybrid is the silencer for any platform. Compatible with pistol calibers from 9mm to .45ACP, rifle calibers from 5.56mm to .4570 GOV and many in between like .458 SOCOM, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles and submachine guns. Boasting low-120 dBs on .300 BLK and remaining hearing safe with .4570 GOV, the Hybrid offers an unparalleled pairing of versatility and performance a combination youve come to expect from SilencerCo products. The Hybrid is rated down to 16" barrels for .4570 GOV and .458 SOCOM and down to 18" barrels for all magnum calibers up to .338 Lapua Magnum. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand.

The Omega™ 45K is an exceptionally versatile suppressor. The Omega Ks are the smallest, lightest, and quietest silencers in their respective classes. Full auto rated and usable with pistols, rifles, and submachine guns, the Omega K series offers extreme durability in an ultra compact package and is compatible with 9mm as well as subsonic and supersonic .300 BLK. With the fully welded, tubeless, minimalist Omega K, big sound suppression now comes in a tiny footprint.

• CALIBER: 9MM TO .45 ACP INCLUDING .300 BLK
• MUZZLE AVERAGE:

9MM: 137.7 DB
.40 S&W: 136.2 DB
.45 ACP: 135.9 DB
.300 BLK SUB: 133.5 DB
.300 BLK SUPER: 136.1 DB

• WEIGHT: 10.7 OZ

Must ship to a U.S. FFL dealer

The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights.

The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer.

9MM to 45ACP & 300 BLK Subsonic

9.2OZ, 7.90" Length

The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights.

The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer.

9mm & 300 BLK

8.8oz, 6.90" Length

The Saker® ASR sets the industry standard for ease of use, modularity, and durability. The Saker ASR was designed for bolt action, semi-auto, and full-auto firearms. In addition to its performance, the Saker ASR’s design allows for maximum user adaptability and convenience. ASR™ (Active Spring Retention) Mount technology facilitates attachment via a variety of different flash hiders, muzzle brakes, and direct thread mounts.

1. CALIBER: 5.56 MM TO .300
2. MUZZLE AVERAGE:

5.56 MM: 129.6 DB
7.62MM: 132.9 DB
.300 BLK: 119.0 DB
.300 WM: 137.7 DB

1. WEIGHT: 23.4 OZ
2. LENGTH: 8.5" - 10.0"
3. DIAMETER: 1.50”
4. MATERIALS: STELLITE & STAINLESS STEEL

Must ship to a U.S. FFL dealer

The SureFire RYDER(TM) 22-S is a lightweight suppressor optimized for .17 HMR and .22 Long Rifle rimfire pistols and rifles. Built to exacting standards like our Fast-Attach(R) suppressors for centerfire calibers, the Ryder 22-S features a patented aluminum body with rounded ends and flutes to reduce weight with no sacrifice in strength, and is coated with a tough Mil-Spec hard-anodized finish that resists scratches, abrasion, and corrosion. At just over 5 ounces in weight and only 5.4 inches long, the compact RYDER 22-S minimizes effects on your weapon's weight and maneuverability. The RYDER 22-S features patented heat-treated stainless steel baffles that offer increased durability and are capable of handling 17 HMR and .22 WMR ammunition - even full-auto fire. Built-in spacers between the baffles help to reduce carbon buildup and keep the suppressor clean longer. The indexed, individually numbered baffles are easy to remove, disassemble, clean, and reassemble. The RYDER 22-S has a stainless steel back plate that contributes to overall durability. Single-point cut 1/2 X 28 threads provide secure and easy attachment to an appropriately threaded .22 caliber barrel, with no tools required. Simply screw the suppressor on until hand tight; unscrew it to remove. The RYDER 22-S comes standard with an included assembly/disassembly tool for removing the baffle stack and reassembling it after cleaning, and a spud-extension tool that aids in pushing the baffle stack out of the body tube.